By admin Asphalt Paving • Construction • • • 0 Comments

Some Tips On New Build Soil Preparation

If you have a new project coming up, you are probably excited; however, you need to make sure the ground is ready to support the new project. One of the most important things you need to think about is the dirt on which the property will go. If the soil has not been prepared properly, you will run into issues with your project. What are a few tips you need to keep in mind in order to make sure the construction process moves smoothly? Take a look below.

Demucking The Soil

First, you need to demuck the soil. You need to dig into the soil to remove organic materials, including peat, that might be present. If there are organic materials present in the soil, it will become weak, causing the material to settle. If you remove organic soil, debris, and other types of muck, you can increase the stability of the soil. That way, you can ensure a uniform load capacity across the entire lot.

Determine the Soil Bearing Capacity

Next, you need to determine how much capacity the soil can handle. There are numerous types of soil. A few examples include silt, sandy clay, and regular clay, which are particularly weak. They can only handle about 2,000 pounds per square foot before they start to shift beneath the construction project, placing it at risk. On the other hand, sedimentary rock is incredibly strong, with the ability to withstand 6,000 pounds per square foot before it begins to buckle. All of these types of soil can show up in the same climate zone, so investigate the type of soil you are building on before the project gets started.

The Permeability of the Soil

You also need to think about the permeability of the soil. If there are gaps between the particles of soil, water and air can flow through it. Different types of soil have different degrees of permeability. The permeability of the soil plays a role in risks related to erosion, compaction, and flooding. You should hire a professional to assess the permeability of the soil because it can play a role in the success of your project.

Ensure the Stability of the Ground

Finally, you also need to think about how stable the lot is. If the lot is not stable, your foundation could fail, placing the entire building project at risk. You should think about how much weight your soil can accommodate, if there are also loose elements that need to be removed, and how deep the foundation has to be poured to support the rest of the construction project. You need to pour the foundation down to the frost line. Research this prior to the beginning of the project.

Get the Soil Ready for Your Project

These are a few of the most important tips you need to keep in mind if you are getting the soil ready for a new project. There are a lot of factors that will play a role in how quickly your project proceeds; however, you need to make sure the project gets off to a good start. You can make that happen by preparing the soil properly. Do not hesitate to reach out to trained professionals if you have questions about the soil’s readiness for your project. You should also reach out to asphalt preparation experts who can help you prepare the soil for your next construction project.

By admin Asphalt Paving • • 0 Comments

Asphalt Paving Calculator – What Goes Into The Cost Of Asphalt

If you have a project coming up that requires asphalt, you want to know how much this is going to cost. That way, you can budget accordingly. At the same time, there are a lot of factors that influence the cost of asphalt. What are a few examples?

Asphalt Grade

There are multiple asphalt grades available and each one comes with a slightly different price tag. The top asphalt grade is commonly used for roads and is the most expensive option. Base grade is usually used for lighter traffic areas and is the cheapest option. Commercial grade is in the middle and contains smooth particles and sand.

Asphalt Type

The type of asphalt you use will influence its price. For example, hot mix asphalt is the most common asphalt used in roads. This is an inexpensive option because it uses recycled materials. It is also flexible, making it easier to install. Warm mixes use fewer fossil fuels because they are heated to a lower temperature. Therefore, warm mixes are inexpensive as well. Cold asphalt doesn’t require a heating application, so it is affordable.

Asphalt Transport Distance

Distance of the project from the original location of the asphalt will also play a role. The farther the asphalt has to travel to reach the project site, the more expensive it will be. The cost of transport also depends on the weight of the asphalt material as well as its type. The heavier the asphalt is, the more expensive the transportation costs will be.

Asphalt Amount

The more asphalt you need to complete your project, the more expensive it will be. The length, width, and depth of the prepared site will all play a role. This information will be required to give you a quote on your project before you get started. The density of the asphalt mix may also influence the amount you require.

Asphalt Man Hours

Similar to any other manual project, the number of working hours will also influence the cost of the total project. The larger the project, the more time it will take. In addition, it might also require more people, driving up the cost. There will always be specific times used for curing and drying the project, so adding additional contractors can only reduce the project’s time by so much.

Asphalt Market Price

Asphalt prices can vary depending on numerous factors in the market. For example, crude oil prices, the number of current construction projects, environmental regulations, and the state of various economies will all play a role in how much asphalt costs. If you work with a professional asphalt contractor, you can time the project correctly to save money on the cost of asphalt.

The Project Type

Finally, the cost of asphalt will vary depending on the type of project you are carrying out. For example, if you are trying to repair an existing surface, you might be able to save money by simply repairing existing cracks. On the other hand, if you need to remove the existing surface and pour new asphalt, you may need to enlist the help of additional services. Your contractor should let you know exactly what you need in order to complete your project.

Find the Right Asphalt

These are just a few of the many factors that will influence the cost of asphalt. Work with a trained professional to get the highest quality asphalt at the best price possible.