By admin Asphalt Paving • • • 0 Comments

5 Most Common Categories of Asphalt Damage

Asphalt is known for being one of the most versatile pavement materials. Most people choose asphalt for its durability, and you might also enjoy how smooth the material looks on large surfaces. While asphalt parking lots and other types of surfaces should last anywhere from 10 to 15 years, they do require some maintenance to reach their maximum life span. Watching out for these common types of asphalt damage helps you know when to arrange for repairs.

Cracking

Cracks can develop due to severe weather conditions, wear and tear from heavy traffic along with poor drainage. There are several different types of cracks that you might notice in the asphalt, and noting which kind you see can help asphalt companies determine the cause of the damage. For example, fatigue cracks involve lots of small ones that run together and create the appearance of an alligator’s skin. These tend to come from chronic excessive loads or poor drainage in a climate with frequent temperature changes. Meanwhile, linear cracks could be caused by general wear and tear.

Depressions

Kids may love how depressions in asphalt surfaces create the perfect puddles, but road maintenance crews know just how dangerous these can be for causing skids. If a depression is relatively shallow and small, then it might only need a surface patch repair. However, some of these can get pretty large, which means you might need to replace the paved area.

Potholes

Coming across a big one of these on a road can lead to popped tires and car accidents. Potholes are ultimately the end result of allowing alligator cracks to go without repairs. Over time, water gets into the cracks and starts to erode the asphalt. Eventually, the cracks begin to intersect and cause chunks to come out of the surface until there is a serious hole.

Rutting

Heavy traffic on asphalt drives can cause indentations to form where the vehicle tires constantly roll across the surface. Since rutting is caused by the surface layers getting compressed by the weight of the vehicles, it tends to be worse when there is already a flaw in the pavement, such as it being too thin or made from a weak asphalt mix. Failing to properly compact the material during the installation process is another reason why rutting might develop, which is why it is important to fully vet asphalt companies before you arrange for their services.

Raveling

Asphalt raveling is caused by the general deterioration of the surface. With raveling, the pieces of the material begin to dislodge, and you might see loose gravel coming up on the surface. On roads and parking lots, the surface can get quite rough, and the loose materials can increase the risk of skids. The good news is that raveling tends to affect just the top surface layer in the early stages, and you might only need to plan for an overlay to fix the problem. Keep in mind that having a loose top layer exposes the underlayers to more potential for damage, so you’ll want to correct the issue as soon as possible.

When caught early, many types of asphalt damage can be repaired before it requires a complete replacement of the surface materials. Whether you have an asphalt driveway, road or trail you’re in charge of maintaining, make routine checks for damage a normal part of your routine. Staying on top of the quality of the surface helps to keep people safe and preserve the appearance of your property.

By admin Asphalt Paving • • • 0 Comments

Do’s and Don’ts to Ensure the Longevity of Your Asphalt Pavement

There’s nothing like a fresh coat of asphalt pavent to make your property or business look inviting and taken care of. You want to keep that look for as long as possible, and that means taking proper care of the material immediately after the asphalt contractors have left. The following is a look at the do’s and don’t’s of maintaining your asphalt to maintain its fresh appearance until it’s time for maintenance or replacement many years from now.

The Do’s of Maintaining Your Asphalt

Asphalt has a lifespan of about 18 years before it needs a total replacement. The clock starts running the moment the asphalt work is completed, but it can take up to a year for asphalt to cure. It’s vital to protect your asphalt after the work has been completed, but you can start using it gently once the initial curing period has been completed.

In order to give your asphalt pavent a good start, be sure to do the following:

  • Block access to cars for the first 24 hours
  • Clean up debris to prevent it from damaging the surface

After the asphalt sets, you can drive and park cars on the driveway or parking spots. Careful use of the paved surface for the next 12 months is recommended, and it’s easy to engage in by making sure cars don’t sit in one place for more than a day or two. As time goes by, you’ll want to take steps to protect your asphalt. They include:

  • Keep it clean with regular washing and sweeping of debris
  • Patch cracks as soon as they appear
  • Seal the driveway on a regular interval, usually every three to five years
  • Make sure water is draining off the driveway and not pooling
  • Remove weeds from the edge of the driveway

The Don’ts’ of Maintaining Your Asphalt

Asphalt is tough, but it’s also malleable and compresses under pressure. It can also get damaged by oil leaks from a vehicle that sits in one place for too long. You definitely want to avoid parking your car in the same spot in the days immediately after the asphalt was laid, but you also shouldn’t park in the same place every time you come home. The same goes for keeping heavy objects on the asphalt for long periods of time, as you’ll wind up with divots forming in the asphalt that aren’t easy to repair.

Other don’t’s include:

Don’t let a car drip oil onto the asphalt

Vehicles are known to leak oil which isn’t always a serious problem in and of itself. It is a serious problem for asphalt as it can cause cracks to form.

Don’t seal coat for at least three years

The oil in the asphalt takes time to dry out and eventually needs refreshing in the form of a seal coat. This is a normal process that should be allowed to play out over time before having asphalt contractorsapply a new coat. The new seal coat should interact with the old coat as little as possible in order to provide the best protection.

Don’t let snow and ice build up on the surface

Asphalt is porous in nature and is easily damaged by frost-freeze cycles. Allowing ice and snow to build up increases the risk of damage to the asphalt from the top down to the bottom layer.

Proper maintenance of your asphalt helps it function for longer, prevents divots from forming, and requires fewer repairs over its lifespan. Use these do’s and don’t’s as part of regular property maintenance for a safe and attractive surface for people and cars to use.

By admin Asphalt Paving • 0 Comments

Does Asphalt Affect the Colorado Environment?

Asphalt has been used for centuries as a paving material. It is durable and weather-resistant. Asphalt in Colorado is used to create a variety of surfaces. But what are the environmental effects of using asphalt? Does it affect air quality? Water resources? How does the use of asphalt in Colorado impact city living? This blog post will take a closer look at asphalt and its effect on the Colorado environment.

The Asphalt Creation Process

Asphalt consists of two main ingredients: rock and bitumen. Rock is the foundation of asphalt pavement. It makes up 85-95% of asphalt pavement by weight and provides structural support for the pavement. The asphalt creation process begins with mining or quarrying rock. The rock is then transported to an asphalt plant, where it is crushed and

mixed with bitumen. Bitumen is a black or dark brown viscous material that binds the asphalt pavement together. It is made up of asphalt cement, a by-product of crude oil refining, and aggregate, a mixture of sand, gravel, and crushed stone.

The asphalt pavement is then placed on a road surface and compacted.

Is Asphalt Reusable?

Asphalt is a sustainable material that can be reused and recycled. It is the most recycled material in the United States. Asphalt companies in Colorado are committed to recycling asphalt pavement (RAP) and milling, which reduces waste and conserves resources.

When asphalt is removed from a road surface, it is crushed into smaller pieces and used as a base for new asphalt pavements. This process is called milling. Milling asphalt can be used to create various surfaces, such as:

  • A temporary road surface while permanent repairs are being made
  • A stable foundation for asphalt paving
  • A drainage ditch lining
  • A material to fill potholes

Asphalt companies in Colorado are also committed to using recycled asphalt shingles (RAS) in asphalt pavements. RAS is a sustainable material that can be used as an additive to hot mix asphalt (HMA). Adding RAS to HMA increases the pavement’s resistance to cracking and rutting and extends the pavement’s life. Asphalt companies in Colorado use RAS in the asphalt pavement to create a more sustainable product.

Asphalt’s Effect On Air, Water, And City Living

Air

While asphalt pavement is not a significant source of air pollution, asphalt production and asphalt paving can release emissions into the air. These emissions include: 

  1. Carbon monoxide
  2. Nitrogen oxides
  3. Particulate matter
  4. Volatile organic compounds

Water

Asphalt production and asphalt paving can also affect water resources. The asphalt creation process uses a significant amount of water, and asphalt pavement itself can contaminate stormwater runoff if not maintained correctly.

City Living

Asphalt pavement can also impact city living as it is a significant source of noise pollution in cities. In addition, asphalt pavement can be a trip hazard, especially for pedestrians and cyclists.

In conclusion, asphalt pavement can impact the environment, but any asphalt company in Colorado is going to be part of the effort toward working to reduce the environmental impact of their products. They are exploring new methods of production that use recycled materials and are developing ways to reuse and recycle asphalt products. These efforts will help reduce waste produced by asphalt companies and contribute to a cleaner environment.

By admin Asphalt Paving • • • 0 Comments

How Does Asphalt Recycling Work?

While you might recycle aluminum cans or plastic bottles at home, many construction companies rely on asphalt paving companies for recycled asphalt. The main material in asphalt, bitumen, tops the global list of most frequently recycled items.

The petroleum product asphalt provides structural strength, can withstand low and high temperatures, plus it can bind together with other materials. Constantly required in the construction of buildings, roads, sidewalks, pools, patios, and much more, this prized substance can also harm the environment to produce. In the US alone, in 2019, manufacturers produced more than 420 million tons of asphalt.

Asphalt paving companies don’t have to use new asphalt though. They can turn to asphalt recycling to reclaim already used asphalt. This reduces its environmental impact. Once recycled, it becomes shingles, waterproofing, or paving products.

Let’s explore how manufacturers mill asphalt, then recycle it, and how it gets used in its most common form – paving.

Asphalt Milling

Asphalt begins the manufacturing process as crude oil. First heated to distill it, the manufacturer then transfers the oil to an extraction container where it removes volatile components called fractions. The heavy deposit leftover – topped crude becomes asphalt after three more steps.

The manufacturer uses a volatile substance to cut back the asphalt. This creates a malleable substance.

Next, the oil goes through an emulsifying process that makes the substance easier to combine aggregate. In this step, the manufacturer grinds the asphalt into tiny globules measuring less than five microns, then mixes it with water. By adding an emulsifying agent like clay, oil, silicate, or soap, the manufacturer reduces the potential for the asphalt and water to separate.

In the final step of making commercial asphalt, the manufacturer pulverizes it to powdered form and sieves it to create granules of a uniform size.

Asphalt Recycling

Asphalt recycling offers a cost-efficient and green method of obtaining this widely used construction material. Recycled asphalt provides no less a product than new asphalt. It provides the same durability and versatility.

Recycled asphalt goes through a milling process in which the manufacturer removes the top layer from the surface on which it got used. This might mean removing the top of a parking lot or driveway or shingling from a rooftop.

Transported to an asphalt plant, the reclaimed product goes through sizing and screening, just as it did when originally made. Unlike its original processing cycle though, when recycled the manufacturer can use either a hot or a cold process to start.

Once it has repeated the original milling process, an asphalt paving company can again use it for a new project. Asphalt offers an ideal construction material since it can undergo multiple recycling cycles without harming its durability or quality.

Asphalt Paving

In some cases, recycled asphalt provides advantages that virgin asphalt cannot. It can contain mineral fillers that increase its strength. It costs less and demands less labor. With respect to its appearance and performance, it offers increased permeability and varying shades of gray. Virgin asphalt comes in black only.

Try Recycled Asphalt

The demand for asphalt continues to grow – about three percent each year. Turn to the $7.1 billion asphalt recovery market for your construction needs. It offers a real money saver for asphalt paving companies.

By admin Asphalt Paving • • • 0 Comments

7 Pavement Preservation Treatments for Your Asphalt Surface

Constructing an asphalt surface such as a driveway, parking lot, or basketball court is a significant financial investment, so it only makes sense to protect it. That means regular maintenance should be performed to preserve the integrity of your asphalt surface and extend its lifespan.

We’re here to help you get the most out of your asphalt surface. In this article, we’ll discuss 7 pavement preservation treatments for your asphalt surface.

1. Routine Maintenance

Routine maintenance is necessary to prevent damage and staining. Fuel and oil from vehicles, as well as leaves and debris, can lead to permanent stains on asphalt surfaces. Oil and fuel spills can also seep into the pavement, leading to cracking and other damage such as potholes. Rock and gravel can also harm the surface when they’re run over by cars.

Asphalt surfaces should be swept frequently, especially after storms, to remove dirt and debris. Car oil and fuel, meanwhile, should be cleaned immediately using a long-handled brush and a mixture of water and either powdered detergent, dish soap, or baking soda.

2. Sealcoating

Sealcoating is another great way to preserve the integrity of your driveway or asphalt surface and make it “pop” again. Many people wait too long to sealcoat surfaces, which can lead to premature wear and a faded, gray color. Consider sealcoating every two years.

The benefits include:

  • Prolonging the surface’s lifespan.
  • Preventing water from seeping beneath the surface and causing cracks and other damage.
  • Restoring the black color.
  • Protecting the surface from harmful UV rays.

3. Crack Sealing

Cracks are bound to sprout up on asphalt surfaces over time, and if you wait too long to fix them with a crack filling or crack sealing, they’ll keep spreading. Although this service can be done throughout the year, one of the best times to contact asphalt companies is after winter. The constant freeze-thaw cycle can wreak havoc on asphalt surfaces.

4. Patching

Like cracks, potholes are also a common enemy of asphalt and can form when water seeps into cracks, freezes, and expands. Potholes are not only an eyesore, but they can lead to trips and falls, and vehicle damage. Patching these areas is an extremely cost-effective solution to improving the appearance and safety of your asphalt surfaces, as well as extending their lifespan.

5. Overlays

Asphalt overlaying is a method of applying about two inches of asphalt over areas of the existing base layer that have deteriorated due to significant potholes, cracks, or uneven surfaces. An overlay can extend the life of your asphalt surface by as much as 15 years depending on its age.

6. Slurry Sealing

Slurry sealing is a type of sealcoating used to protect asphalt and add value to asphalt surfaces. While normal sealcoating uses liquid asphalt, slurry sealing contains water, aggregates, and asphalt emulsion. Slurry sealing is commonly applied every five to seven years on roads that have received severe deterioration due to traffic.

7. Microsurfacing

Microsurfacing is an asphalt maintenance technique that can extend the life of blacktop roadways by an average of five to seven years. It’s a third less expensive than repaving and is commonly used by local governments for roads. Microsurfacing is the process of using a mixture of aggregate, water, and asphalt emulsion and adding it to an existing surface. Microsurfacing doesn’t rely on water evaporation in the asphalt emulsion, and, instead, uses chemical additives that can harden quicker.