The Cost of Drainage Issues on Your Pavement

Pavements are important to our contemporary lives by providing a smooth surface onto which we can transport goods and people as well as communicate with each other. Therefore, it is important to keep your pavements in optimal shape. This can be achieved through proper drainage. It is considered the element that ensures a long lived quality pavement. Problems can occur due to moisture accumulation in any structural layer of the pavement.
Long-term problems can not only be caused by standing water from heavy rain or sprinklers but also from underground water, which is harder to detect. Cracks in the pavement provide a way for the ground water to seep into the parking lot from below the surface. Some of the drainage issues affecting pavements include;

Winter Liability
During winter months, your pavement can quickly fill up with ice formed by seeping groundwater. The people walking here may be in danger of injury resulting in liabilities for you and your business. It may also make it difficult to control a vehicle as hydroplaning can occur at speeds as low as 35 MPH.

Water ponding
This refers to the collection of water at deteriorated shoulders or pavements. Ponding can be caused by a backup in the drainage system or an insufficient cross slope. The pavement’s original cross slope can be affected by both maintenance and traffic activities. It is especially hazardous at intersections a driver will require greater distances to stop. It is also dangerous in wheel paths or ruts. Wheel ruts are caused by traffic, especially heavy truck traffic, resulting in bituminous pavement movement to the wheel path sides. They are noticeable and run parallel to the pavement’s centerline.
Ponding can cause drivers, pedestrians, or bicyclists to divert paths, often encroaching the opposing lane. This endangers their lives as well as the lives of opposing motorists. Ponding contributes to the rutting of stabilized soil and deterioration of the pavement edge resulting in additional safety hazards. Vegetation growth and debris build-up can cause shoulder to scour and edge drops when the pavement edge traps water.

Shoving
Occurring frequently at stop locations such as intersections, this pavement condition results in the pavement having a series of ridges running across it. These ridges are hazardous when wet and dry as they can retain water and cause a vehicle’s wheels to bounce respectively. This bouncing decreases braking ability and reduces the pavement’s contact with the wheels.

Issues with Maintenance
Sealers may not work as they should due to the water and leak impact on asphalt. Wet asphalt does not enable the adhesion of sealant. The sealant will re-emulsify and be easily tracked into stores or cars. You can experience difficulties in maintenance due to poor location, trapped debris, flat grades causing clogging of pipes, and low-flow conditions lacking self-cleansing velocities.

Long Term Damage
Standing water may result in structural damage which is long-term and costly. Lack of adequate maintenance can also result in long-term, costly damage. The weakening of entire areas will happen first, then falls and large cracks will occur. Not short-term fixes will be available for potholes.

Drainage issues can be hard to detect, but they result in some costly mistakes. You should strive to prevent the accumulation of these small issues before they develop into major problems.

Top 6 Factors that Affect Asphalt Paving Costs

Asphalt is one of the leading paving choices for its affordability and cost-efficiency. When an asphalt parking lot or driveway is properly paved and maintain, it can last for decades.

When installed properly, asphalt becomes less visible to most users than other parts of a construction project. For incredible end result, ensure asphalt installation is of high quality. Finding a balance between value and cost within a budget can be an uphill task.

So, what factors can affect asphalt paving cost?

 

Total Square Footage

When planning for asphalt paving, the size of coverage needs consideration. Long and wide pavements need a significant amount of base material, labour, time, and asphalt to complete. The depth of the prepared site is also an important factor.

Some tools like the Basic Construction’s Asphalt Calculator can approximate the amount of materials required. Estimation is made with reference to a benchmark mix density of 148 pounds per every cubic foot.

Although densities vary between mixes, the stated value is a standard rule-of-thumb ideal for estimation purposes. Reduced bulk rates may be available for considerably large projects.

 

Asphalt thickness based on load requirements

In most projects, a 4-inch depth is usually adequate. Nonetheless, 5 to 6 inches of full-depth asphalt guarantees a stable and strong paving ideal for a wide range of loads and climates. Some contractors make use of 6 to 8 inches of compacted gravel or aggregate as a base for 3-inch asphalt pavement. Routinely, the cost incurred to apply asphalt to a parking lot is cheaper than that of a driveway. The greater surface results in price reduction per square foot. Heavy loads require thicker asphalt layers resulting in a more significant budget.

 

Possible obstructions

The lifespan of any paved surface relies on proper drainage. In case there are obstructions, more work is needed to make enough room for the new asphalt paving. Extra work increases the cost necessary to construct the asphalt pavement to completion.

 

Distance to the nearest hot plant

Asphalt transport cost from the production plant to the project site is a considerable factor in budgeting. Also, the type of asphalt required affects transport costs. Hot mixes cost more to transport than warm blends.

Some suppliers manufacture in-house asphalt while others combine raw materials from various locations. The best and most dependable suppliers own and operate an asphalt plant. They use their manufactured materials to make the asphalt guaranteeing consistent and high-quality products.

 

Permit requirements

Any asphalt project connecting to a public road must satisfy necessary requirements of the municipality. A permit may be necessary, and in some cases, you may need to change plans to suit municipality requirements. Changes and acquisition of permits may result in increment of the project cost.

 

Quality of the base

High quality base guarantees durability. However, it also attracts high cost. Installing between 8 and 10 inches of gravel below your asphalt is essential for drainage. The higher the material quality of the base, the more expensive your asphalt project becomes.

It is undeniable that asphalt is the most preferred material for paving. Before any undertaking, prepare a budget. Include every detail that may change costs. If you’re working on a shoe string budget, consider consulting an expert to help you minimize cost and maximize quality. Call us today to speak with one.