By admin Asphalt Paving • • • 0 Comments

Do’s and Don’ts to Ensure the Longevity of Your Asphalt Pavement

There’s nothing like a fresh coat of asphalt pavent to make your property or business look inviting and taken care of. You want to keep that look for as long as possible, and that means taking proper care of the material immediately after the asphalt contractors have left. The following is a look at the do’s and don’t’s of maintaining your asphalt to maintain its fresh appearance until it’s time for maintenance or replacement many years from now.

The Do’s of Maintaining Your Asphalt

Asphalt has a lifespan of about 18 years before it needs a total replacement. The clock starts running the moment the asphalt work is completed, but it can take up to a year for asphalt to cure. It’s vital to protect your asphalt after the work has been completed, but you can start using it gently once the initial curing period has been completed.

In order to give your asphalt pavent a good start, be sure to do the following:

  • Block access to cars for the first 24 hours
  • Clean up debris to prevent it from damaging the surface

After the asphalt sets, you can drive and park cars on the driveway or parking spots. Careful use of the paved surface for the next 12 months is recommended, and it’s easy to engage in by making sure cars don’t sit in one place for more than a day or two. As time goes by, you’ll want to take steps to protect your asphalt. They include:

  • Keep it clean with regular washing and sweeping of debris
  • Patch cracks as soon as they appear
  • Seal the driveway on a regular interval, usually every three to five years
  • Make sure water is draining off the driveway and not pooling
  • Remove weeds from the edge of the driveway

The Don’ts’ of Maintaining Your Asphalt

Asphalt is tough, but it’s also malleable and compresses under pressure. It can also get damaged by oil leaks from a vehicle that sits in one place for too long. You definitely want to avoid parking your car in the same spot in the days immediately after the asphalt was laid, but you also shouldn’t park in the same place every time you come home. The same goes for keeping heavy objects on the asphalt for long periods of time, as you’ll wind up with divots forming in the asphalt that aren’t easy to repair.

Other don’t’s include:

Don’t let a car drip oil onto the asphalt

Vehicles are known to leak oil which isn’t always a serious problem in and of itself. It is a serious problem for asphalt as it can cause cracks to form.

Don’t seal coat for at least three years

The oil in the asphalt takes time to dry out and eventually needs refreshing in the form of a seal coat. This is a normal process that should be allowed to play out over time before having asphalt contractorsapply a new coat. The new seal coat should interact with the old coat as little as possible in order to provide the best protection.

Don’t let snow and ice build up on the surface

Asphalt is porous in nature and is easily damaged by frost-freeze cycles. Allowing ice and snow to build up increases the risk of damage to the asphalt from the top down to the bottom layer.

Proper maintenance of your asphalt helps it function for longer, prevents divots from forming, and requires fewer repairs over its lifespan. Use these do’s and don’t’s as part of regular property maintenance for a safe and attractive surface for people and cars to use.

By admin Asphalt Driveway • • • 0 Comments

Keeping Up With Curb Appeal: The Top 5 Driveway Maintenance Tips You Need to Know

Whether you have bricks, pavers, concrete or an asphalt driveway, keeping it in good shape is the biggest factor in how long the surface will effectively serve you. Upkeep is also essential to ensuring that they maintain their appearance and add value to the home. Check out these top tips for maintaining the most common driveway materials.

1. Stay Diligent with Seal Coating

Driveway maintenance will be eased with routing seal coating of the installation’s surface. This is a good move for most kinds of solid-surface driveways, and is a must-do for concrete and asphalt materials that can stain and deteriorate with excessive sun and moisture exposure.

However, an asphalt driveway will need around 90 days to cure before being sealed. Most surfaces will need to be resealed about every two years to extend their lifespan and keep them looking attractive. This task is often best left to professionals, as it takes special tools and can be time-consuming for the typical homeowner.

2. Clean Up Stains Quickly

Routine seal coating can help prevent stains from oil, gas and other fluids that can penetrate bricks, pavers, concrete and asphalt driveways. Yet, it’s best to immediately clean up any such spills to keep stains at bay, which is likely to detract from the beauty of the home. Consider regular pressure washing to retain an ultra-clean look throughout the year.

3. Don’t Let Plants Take Over Driveway Surfaces

While green foliage is desirable in landscaping, plants and weeds can be a true menace to driveways. They can penetrate through to the surface by way of small cracks, which can actually widen them over time. Experts recommend filling in any cracks quickly and aggressively.

To prevent grass from taking over the edges of driveways, invest in some type of trim, edging or river rocks to place along the sides. In addition to keeping grass where it belongs, this addition can become a key visual element of your hardscaping design.

4. Perform a Driveway Inspection After Winter or Heavy Freezes

Should you reside in an area that sees freezing temperatures or seasonal snowfalls, the driveway will experience freeze-thaw cycles. Unfortunately, this can be a primary cause of driveway damage and is a particular issue with an asphalt driveway that can easily shift.

Be sure to do a visual inspection after deep freezes or heavy snow to check for cracks, potholes, or any signs of crumbling materials. Be prepared to take care of any necessary repairs right away. Ignoring deterioration will only allow the problem to worsen and spread to other areas of the driveway.

5. Invest in a Driveway Professional

While it’s possible to do a good portion of driveway maintenance and basic repairs as DIY projects, bigger jobs might be best left to professionals. In cases of tough stains or large installations, an experienced technician can make magic happen with greater ease and in less time. Having a local contractor in place ensures fast repairs and regularly scheduled seal coating and cleaning.

Don’t Underestimate the Talents of a Pro

As you can see, the driveway is a large part of a home’s exterior features, and will be seen by neighbors and passersby on a regular basis. Don’t be the neighbor who neglects their driveway and drives down the overall curb appeal on your street. Invest in driveway maintenance!

By admin Asphalt Driveway • • • • 0 Comments

Is a Concrete Driveway the Best Choice for Your Home?

Has your driveway seen better days? Cracks, potholes, and drainage issues are all tell-tale signs that a new driveway install may be in your immediate future.

If you’re ready to replace your driveway, you have many options, including having a concrete driveway or a cement driveway installed. Keep reading to learn about the pros and cons of installing a concrete vs. a cement driveway.

The Differences Between Concrete and Cement Driveways

Concrete and cement are often used interchangeably because they look similar; however, they are not the same. Very few things are constructed with cement alone.

Cement is an ingredient in concrete. Along with cement, concrete is also manufactured with water and aggregates including gravel, stone, and sand, which make up about 75% of concrete. Cement, meanwhile, is made from a mixture of silicon, calcium, iron, and aluminum, which are then heated up to a very high temperature before being ground into a fine powder we know as cement. It is then often used as a component of concrete.

Using cement alone is more suitable for smaller projects such as grout or to repair damaged concrete. Most experts don’t recommend using just cement to construct a driveway because it is less durable than concrete and won’t last as long.

Using Concrete to Construct a Driveway

Concrete is one of the most popular and durable materials in the world. It’s used to construct homes, commercial buildings, driveways, columns, and foundations.

Some of the benefits of choosing a concrete driveway over cement, asphalt, or gravel include:

Durable and Long Lasting

Well-maintained concrete driveways can last 30 years or more. Ensure you hire a reputable concrete company to install your driveway as proper installation plays an important role in the durability and lifespan of your driveway. Typically constructed with separate square slabs, concrete driveways are durable enough to handle heavy trucks, RVs, and boats. Concrete driveways often last 50% or longer than asphalt surfaces.

Low Maintenance

Concrete driveways are incredibly easy to maintain. They typically require only regular sweepings or power washes. A concrete sealer should be applied once a year, especially in colder climates that experience frequent freeze-thaw cycles.

Cost-effective

Although concrete driveways are more expensive to construct than other surfaces, they’re most cost-effective in the long run because of reduced maintenance costs, fewer repairs, and a longer life expectancy.

Increased Home Value

Concrete driveways can help increase your home’s value. Not only do many people think concrete is more aesthetically pleasing than other surfaces, but potential homebuyers may be more likely to buy your house knowing the surface requires little maintenance and can last for 30 or more years before a replacement driveway is needed.

Environmentally Friendly

Concrete is a recyclable material, which makes it environmentally friendly. It also requires reduced energy than other materials because it doesn’t need to be repaired, resurfaced, and it lasts longer.

The Cons of Installing a Concrete Driveway

Overall, there are very few cons to installing a concrete driveway. If you’re looking for a cheaper alternative to a concrete driveway due to budgetary constraints, then it may be more cost-effective in the short term to install an asphalt driveway.

Although concrete requires minimal maintenance, it does need to be sealed once a year to ensure the durability of the surface. Fluids or oil stains from cars can be very difficult to remove once they seep into the surface.

By admin Construction • • • 0 Comments

3 Reasons Most DIY Concrete Patios Fail

Tips from a Concrete Company to Set Your Patio Up for Success!

Concrete patios are becoming more of a trend and it’s not difficult to see why – they’re sturdy, they’re long-lasting, and they look amazing! But to have a concrete patio that’s sure to be the talk of the neighborhood, you’ll have to keep three important factors in mind.

If a concrete patio isn’t set correctly, it could cause dilapidations over time, which could potentially be dangerous. Make sure your patio is safe – don’t take shortcuts and refer to our additional concrete tips and tricks for more assistance.

From our concrete company to your home, follow along to create a concrete patio that avoids these common mistakes!

“Make sure your patio is safe”

Reason #1: No Concrete Form Is Built

In order to make sure your patio is stable and won’t crack/crumble over time, it is integral to have a concrete form. A concrete form works to keep your concrete mixture in place while it dries. When you originally mix your concrete, it will be more of a liquid (similar to a peanut butter texture) that can ooze and spill easily.

That’s why a form is so important, in order to keep your concrete in place while it hardens. Once it is set, it will become stiff, and you will be able to remove the concrete form as you wish. Be sure to allow 24-48 hours for your concrete to dry, depending on the type of mixture you used. You should be able to find this information in the directions located on the container.

“A concrete form works to keep your concrete mixture in place while it dries.”

Reason #2: Concrete Form or Template Isn’t Level

Because you’re going through the process of creating your gorgeous new patio, of course you want it to look its best! That’s why it’s so important to make sure before pouring your concrete that the form or template you’re using is level. If not, it could lead to bubbles, cracks, and splits within your new patio – which, surely, isn’t the look you’re going for.

This can sometimes be tricky to determine when working on uneven terrain, so it may be helpful for you to purchase a leveler, just to be completely sure that your form or template is level. This will ensure that your new concrete patio is smooth and seamless!

“Make sure before pouring your concrete that the form or template you’re using is level.”

Reason #3: Measurements are Rushed

As previously mentioned, it is extremely important to take your time when pouring concrete. As a concrete company ourselves, we wholeheartedly understand the intricacies that come with this process. Measurements are one of the very first things you should do before even thinking about leveling, mixing, or pouring your concrete.

If your measurements are rushed, there’s a higher chance they won’t be exact – which could lead to uneven forms, crooked templates, and an overall unideal outcome of your concrete patio. One of the biggest pieces of advice we can give you is to take your time to make sure the measurements are exact – from there, everything else should go smoothly!

“It is extremely important to take your time when pouring concrete.”

Contact us for more assistance

As your trusted concrete company, we are here to help you with whatever project you may be working on. For more tips, tricks, and advice, don’t hesitate to contact our experienced team members!

By admin Asphalt Paving • • • 0 Comments

6 Common Myths About Concrete

Concrete is that all-important material so critical to large-scale industrial, commercial, and residential construction projects. In fact, aside from water, no other material is used more than concrete. Its wide range of uses means it’s the preferred material for concrete companies when erecting standing structures like bridges and buildings.

However, despite how much it’s used, there are some common misconceptions about this universally-adopted material. To clear the air, here are 6 common myths about concrete debunked.

1. Concrete is always a gray color.

While concrete initially has a gray color, it doesn’t necessarily mean that gray will be the final color. There are multiple additives and mineral colors that can be blended into the concrete mixture long before it’s dried. These additives can change the color of the concrete once hardened. This is ideal for residential and commercial projects where maintaining an aesthetic is critical.

2. You can use acid to strip a concrete sealant.

This is perhaps the most common misconception and it’s a dangerous one. Acid should never be used to strip concrete sealant, no matter what the reason. Acid’s corrosive properties can seriously damage the concrete’s integrity and allow water to permeate throughout the concrete. The best solution is to avoid acid altogether and use a solvent or sealant remover.

3. Concrete and cement are the same thing.

No, concrete and cement are not the same. Cement is an ingredient in concrete. Cement is mixed with water, sand, gravel, and other aggregates and additives when making concrete. There are very few applications where cement is used on its own. Cement is a dry powder that acts as a binder for all the additives, water, and aggregates in order to make concrete harden.

4. The higher the compressive strength, the more durable the concrete.

Strength and durability are not the same. Concrete’s compressive strength can vary from a low of 2,500 psi to a high of 10,000 psi. However, strength refers to how much load/weight the concrete can withstand. Durability refers to how long the concrete can maintain that load/weight without degradation (breaking down).

Several conditions can affect the concrete’s durability such as freeze-thaw cycles, corrosion, cracking, and sulfate or chemical reactions. The best way to maintain concrete’s durability is by using a top-notch sealant that helps to keep water and other substances from seeping inside and degrading the concrete.

5. Concrete is impermeable.

Actually, concrete is not impermeable. Concrete is actually porous, which means water, fumes and noxious liquids can pass through the top layer of the concrete relatively easily. This can take anywhere from a day, to a month, or even several years. This is why using a high-quality sealant is so important to protect the concrete from the outside elements.

6. You can lay concrete any time of year.

Unfortunately, you simply cannot lay concrete any time of the year or under all conditions. Extreme weather conditions affect how concrete hardens. Below freezing or excessively hot temperatures will prevent the concrete mixture from properly drying.

Concrete installation shouldn’t be done in the extremely cold winter months or the high heat of summer. Instead, spring and fall are the best seasons for mixing and hardening concrete.

Interested in a proactive, customer-centric partner for your next construction project? If so, contact us now.